Inflatable Liferafts
Brands:
Brands:
- Fujikura Composite
- Shanghai Youlong Rubber Products Co .Ltd
- Jiangsu Haining Marine Equipment Plant
Product Category
Throw Overboard Liferafts
The inflatable liferaft is stored in a container on the deck. When throw Liferafts to water, the painter line is pulled and liferaft automatically inflated.
Capacity: 6, 10, 15, 20 and 25 person
Standards:
The inflatable liferaft is stored in a container on the deck. When throw Liferafts to water, the painter line is pulled and liferaft automatically inflated.
Capacity: 6, 10, 15, 20 and 25 person
Standards:
- SOLAS 74 as amended Reg.III/4, 13, 21, 26, 31, 34, Reg.X/3
- MSC.48(66) LSA Code,MSC/Circ.811
- 1994 and 2000 HSC Code 8
- IMO Res.MSC81(70), MSC/Circ.980, MSC.218(82), MSC.226(82), MSC.295(87)
- MSC/Circ.811,ISO 15738(2002)
David Launched Liferafts
The inflatable liferaft is stored in a container on the deck, inflated on board and launched by a Davit from board of Vessels.
Capacity: 15, 20 and 25 person
Standards:
The inflatable liferaft is stored in a container on the deck, inflated on board and launched by a Davit from board of Vessels.
Capacity: 15, 20 and 25 person
Standards:
- MSC.81（70）Revised Recommendation on Testing of Life-saving Appliances
- MSC.48（66）International Life-saving Appliance Code
- MSC.218（82）Amendment to the International Life-saving Appliance Code(LSA Code)
- MSC.226（82）Amendment to the Revised Recommendation on Testing of Life-saving Appliances
- Amendment to the International Convention for the Safety of Life at Sea, 1974
- MSC.293（87） and MSC.295（87） related requirement
Open Reversible Inflatable liferaft
The inflatable liferaft is stored in a container on the deck. When throw Liferafts to water, the painter line is pulled and liferaft automatically inflated. Usually using for passenger ships.
Capacity: 25, 50 and 65 person
Standards:
The inflatable liferaft is stored in a container on the deck. When throw Liferafts to water, the painter line is pulled and liferaft automatically inflated. Usually using for passenger ships.
Capacity: 25, 50 and 65 person
Standards:
- MSC.81（70）Revised Recommendation on Testing of Life-saving Appliances
- International Code of Safety for High-Speed Craft (2000)
- MSC.293（87） and MSC.295（87） related requirement
Liferaft Davits
General Features
General Features
- Safe Working Load (SWL): 2,300 kg (maximum 4 m slewing radius)
- Lowering Height: Up to 40 m (including 10° trim / 20° list conditions)
- Operating Temperature: -20°C to +45°C (other ranges available upon request)
- Weight: Approximately 1,925 kg (including winch, dry weight)
- Operation: Manual hoisting and gravity lowering
- Slewing Mechanism: Manual crank handle
- Boarding Position: Inboard/Outboard at deck level
- Operating Position: From deck side and from inside the raft
- Lowering Speed: Not less than S = 0.4 + (0.02 × H), not exceeding 1.3 m/s
- Pivot Bearing: Slewing bearing
- Wire Sheaves: Galvanized, equipped with ball bearings
- Installation: Single deck welding point (reduces installation time)
Marine Evacuation System
The Double Chute Evacuation System is stowed in the stainless steel container on the deck. When releasing the handle, the system will be formed into the sea automatically.
Working height: 10 to 22m
Standards:
The Double Chute Evacuation System is stowed in the stainless steel container on the deck. When releasing the handle, the system will be formed into the sea automatically.
Working height: 10 to 22m
Standards:
- MSC.81（70）Revised Recommendation on Testing of Life-saving Appliances
- MSC.48（66）International Life-saving Appliance Code
Liferaft Cradles
Material: Marine-grade galvanized steel
Surface finish: Hot-dip galvanized / Epoxy painted for corrosion resistance
Cradle Capacity: Suitable for 6–25 person liferafts (can be single or double cradle)
Cradle type: Fixed / Swing-out / A-frame
Mounting: Welded or bolted to deck or rail
Material: Marine-grade galvanized steel
Surface finish: Hot-dip galvanized / Epoxy painted for corrosion resistance
Cradle Capacity: Suitable for 6–25 person liferafts (can be single or double cradle)
Cradle type: Fixed / Swing-out / A-frame
Mounting: Welded or bolted to deck or rail
Lashing for Liferaft with Fittings
Core Material: Galvanized steel wire rope
Nominal Diameter: 4 mm to 12 mm (including PVC coating)
Coating: UV-resistant PVC
Fitting included: Turnbuckle, Shackles, Wire Rope Clips, Quick Release Hook
Fitting Material: Stainless Steel
Core Material: Galvanized steel wire rope
Nominal Diameter: 4 mm to 12 mm (including PVC coating)
Coating: UV-resistant PVC
Fitting included: Turnbuckle, Shackles, Wire Rope Clips, Quick Release Hook
Fitting Material: Stainless Steel
Hydrostatic Release Unit Hammar H20R
Activation depth: 1.5 - 4m
Service Life: 24 months
Temperature Range: -30°C to +65°C
Complies with SOLAS 74/96, IMO Resolutions MSC.48(66), MSC.81(70)
Maintenance-free with no annual servicing
Activation depth: 1.5 - 4m
Service Life: 24 months
Temperature Range: -30°C to +65°C
Complies with SOLAS 74/96, IMO Resolutions MSC.48(66), MSC.81(70)
Maintenance-free with no annual servicing
Leading with Safety, Serving with Skill.